CADelet Professional

Job orders management, network projects sharing, backup and recovery.
Saving, uploading, and sharing projects on EG Cloud, with the option to generate sharing links with other operators.
Management of user profiles for conditional access to the common database and library.
Configuration of graphical mode and diagram management.
Importing PDF vector files in the drawing.
Portability of the project database on other work environments.

Index

EG Cloud is a cloud data backup and sharing service, managed through the software infrastructure and datacenter of Acronis, that Electro Graphics makes available to users of its software under warranty and/or maintenance contract.
With EG Cloud, it is possible to:
• Upload projects to your cloud space, organized in folders and subfolders.
• Download and open projects previously uploaded to EG Cloud.
• Navigate your cloud space through the EG Cloud browser, which provides the essential commands to create new folders, upload and download files, create sharing links, etc.
• Access your cloud space through the Acronis web portal to access content and account settings pages.
• Access your cloud space from mobile devices through the Acronis Cyber Files app, which allows, among other features, to add annotations to PDF printouts for subsequent import into electrical schematic drawings in graphical environment.

Index

Controls organized on interactive, contextual and dockable toolbar.
Multisheet drawing system for managing an unlimited number of sheet; MDI for manage multiple drawings and diagrams.
A lot of sheet type: title page, single-line, multiline, functional, cables and terminal blocks.
Parameterization of reports according with IEC 61082-1, even by interactive wizard.
Tracing of multiwire lines, leads, drop line, bus, serial connection, parallel or T-junction, with the assignment of designation, color and wire section.
Bundles of wires and equipotentiality bars.
Identification with functional group and location according to IEC 81346; general functions to edit properties on filtered groups of components.
Automatic positioning of topographic symbols in relation to typical entities; automatic attributes rotation.
Editing symbols with access to the archives.
List of sheets, copy, move and shift of sheets, revision index, global editing of titlebox.
Explosion of diagram, in order to split the multisheet and to obtain one drawing file for each sheet. Legend of symbols.
Full compatibility between the line CADelet, Smart, iDEA, Eplus.

Index

Library manager with advanced searching and sorting of symbols, creating groups, setting typical parameters, and automatic alignment during insertion.
Comprehensive libraries of standard symbols according to CEI, IEC, DIN, ANSI/CSA, NEMA and P&ID.
Library of symbols and cell in medium voltage.
Library of symbols for pneumatic, hydraulic and heat engineering according with UNI.
Standard symbols for security, fire alarm, intrusion detection and domotic applications.
Wide library of 2D and 3D shapes of electrical equipments, cabinets, panels, ducts and installation details.
Unlimited user library with wizard interactive for the creation of new symbols.
Management of control points and accessories compositions.
Management of macro-symbols and typical sheet.
Using universal symbols (black box) for functional groups or cards.
Importation of structured information of electrical devices from edz file.

Index

Wizard to create a multisheet diagram assembling drawings previously developed, with preview of the new project.
Managing sheets sorting, components marking with check and resolution of any conflicts.

Index

Management of global system parameters and schema-specific parameters, including the definition of derived variables.
Generation of relationships and formulas between parameters, with the use of the results in managing and editing parametric macroblocks and attributes.

Index

Automatic generation of diagram based on a library of macro blocks with parametric and editable variables.
Management of profiles of variables configuration.
Assignment of sheet, location and variables of macro block.
Multisheet diagram generation based on sequences of macro blocks, with variable, acquired from .xls file.

Index

List of all components in the diagram and view of their properties.
Rapid localization of elements and editing of associated data.

Index

Large database of assembled components (contactors, relays, buttons, etc.).
Drawing of elements in distributed representation, and consistency check on the symbol type and pins.
Correlation with the database of components, with a consistency check on the selected item.
Assisted research of appropriate commercial component.

Index

Importing I/O list of PLC (file from software Siemens, Schneider, Omron, etc.) for the schematic drawing of PLC (operand, intermediate junctions, actuators and control elements).
Management of PLC cards with types of operands that can be defined when inserted into the drawing.
Editing I/O operands, symbols and characteristics.
Saving data as file compatible with software of Plc manufacturers or as xls file.
Automatic drawing of operands as distributed mode or single board.
Connection tables of the operands with external actuators.

Index

Automatic symbols marking according to EN 81346 e 61346, CEI 3-34, IEC 750, with consistency checks in real time.
Setting of marking parameters (letter, function, location, sheet, row, column, index).
Creation of user marking profiles.

Index

Automatic drawing of cross references among assembled elements in the diagram and real-time update.
Online management of contacts and pinouts with check of number of contacts according to the used components.
Graphics representation of pin contacts with several types of summary tables.
Localization of disjointed elements with navigation on diagram.
Correlation and cross reference between the electrical diagram and the pneumatic diagram.

Index

Block diagram of the interconnections among the various locations.
Setup of bundles of cables and their connection to the terminal blocks.
Setup of cables belonging to different bundles and their labeling.
Check of consistency and orientation between cables and terminal blocks.
Bidirectional connection with P&ID diagrams or other interchange file with list of equipments.

Index

Automatic (real time), semi-automatic or manual numbering of connection wires.
Detection of connection methods (serial, parallel or T).
Setting of wire numbering with parametric composition of the wire mark, graphic properties, constraints, wire-clamp assignment and marks reservation.
Management of bundles of wires and equipotential bars.
Wire analysis with recognition of phases and levels of device crossing.
Equipment recognition, numbering of wires and terminals on a single-line diagram and parametric constraints with indications of the phases.
Cross-reference of wires on different sheets.
Automatic identification of short-circuit conditions or inconsistent symbols.
Summary table of the used wires.
Setup of cables on the diagram.
Export data of wiring to Cablo (optional module, see Cablo).

Index

Database of terminals and connectors (modular also) with over 1800 items from leading manufacturers.
Setup of terminal blocks with choice of type and parameters setting.
Use of multi-level, special (with disconnectors, fuse, etc ) and multi-conductor terminal blocks.
Automatic drawing by fence line or box and terminal numbering (by phases, start-ups, sequences, etc.).
Management of junction box.
Marking of terminal boards and editing of terminals numbering. Localization of terminals and connectors with automatic navigator.
Automatic processing of wire or bar bridges.
Automatic drawing of terminal blocks and connectors with default or user-customized graphics.
Automatic drawing of cables connected to terminal blocks and connectors.
Preliminary setup of cables on the plant layout diagram.
Drawing of the layout of cables and pre-wired wires.
Drawing of connection diagram between terminal blocks and components, terminal blocks table and cable laying table after wiring processing in Cablo.

Index

Graphic representation of the electrical connections that connect one component to the rest of the system.
Report information about crossed terminals and connectors, connected cables, available terminals.

Index

The analysis of the power flows allows to determine the power and current values required in certain points of the wiring diagram in order to allow the correct sizing of disconnecting and protection elements. power supply groups, generators, transformers and converters.
The analysis is aimed at two functions.
- Calculate the electrical power (active and apparent) absorbed by the loads connected to a component in the wiring diagram. The value of the absorbed power is acquired from the technical data of the material item assigned to the symbol in the wiring diagram.
- Calculate the current values on the component output lines. This second analysis depends on the definition of the phases on the symbol pins.
All analysis data can be saved on XLS excel file.

Index

Database of carpentry and panel accessories.
Drawing guides and conduits with calculation of the length.
Semi-automatic arrangement of component shapes on the bottom plate, panel or door, with search and filter aid.
Automatic insertion of shapes on DIN guide.
Automatic generation of rear button panels and drill plates of panels.
Automatic dimensioning and 3D representation.

Index

Calculation of overtemperature in the cabinet according to CEI 17-43.
Verification with forced ventilation or air-cooling and calculation of air flow and power removed.
Control of the working temperature limit on components inside panel.

Index

Printing of diagram sheets or saving as PDF.
Jump between command / referred elements or wire references in the diagram saved as PDF.
Generation of a single technical report PDF including diagram and attached documents with hypertext links.
Exporting sheets as several image formats (bmp, tiff, jpeg, etc.).

Index

Automatic translation of texts on drawing in several languages that can be optionally displayed, and interaction with Microsoft Translator®.
Dictionaries, each one with several languages, provided by thousands of translated texts.
Custom dictionaries.
Unicode text handling.
List of the untranslated words in a temporarily dictionary for later translation.
Using the dictionary as an archive of sentences, to be included as descriptive texts on the drawing.
Following a translation, it is possible to generate PDFs in multiple languages, with texts displayed in the selected language.

Index

Access to database in client/server mode, with a powerful search and filtering engine.
Possibility to use alternative database engines, with support of SQL database servers such as SQLite (SQLite, MySQL or SQL Server).
Managing databases in client/server mode.
Stock materials database with more than 140.000 basic articles.
Importing files in standard Metel® provided by manufacturers and distributors of electrical material.
Database with more than 5.000 items of cost feature.
Database with more than 1.900 standard equipments (auxiliary and power contactors, relays, buttons, etc.).
Database with more than 11.000 cables and 6.000 types of conduits and pipes.
Database with all electrical characteristics of more than 90.000 devices (switches, fuses, breakers, etc.) and busbars.
EGData Exchange: tool for the selective download and importation of data packages, classified by manufacturer and series, to update and enhance all database.

Index

Summary table of the used materials, with customizable format.
Bi-directional connection with Tabula (optional module, see Tabula), for the management of Bill of material.
QR codes with links to material documents can be shown on the drawing and material lists.

Index

Drawing of walls, doors and windows (2D or 3D), drawing of chimneys, niches, pilasters, pillars and columns.
Automatic floorplan dimensioning.
Definition of locals and interactive link with the symbols contained inside.
Tables of locals, utilities, power loads,...
Labelling of conduits and layings representation according to IEC standard.
Management of the minimum equipment on the plant according to CEI 64-8 or customizable.

Index

Inserting on the plan of symbols related to the items required on the preliminary calculation.
On-line check on the quantities already inserted and compared with expected quantities.
Monitoring the amount of work in relation to the elements inserted in the drawing.

Index

Lighting calculation according to UNI 12464, with definable devices and their automatic layout on the floor plan.
3D drawing of rooms with ISOLUX displayed on walls and horizontal surfaces.
Check of illumination in direct mode or with more reflections on the walls.
Large list of equipment, complete of photometric characteristics,
extensible importing EULUMDAT and IESNA files.
Report of calculation exportable to RTF files.

Index

3D drawing conduits and rendering.
Management of compartments inside the conduits.
Assign materials and any accessories of the conduit.
Exploration of the used materials.
Table of sections and parts.
Automatic determination of the optimal path for cables.
Automatic threading of the terminal circuits with recognition of the connection diagrams.
Reconstruction of path depending on the type of endpoint (control, socket or other).
Verification of the packaging of the chosen conduit and filling check in according to the standard.
Drawing details of laying of cables inside conduits.

Index

3D drawing of electrical line distribution and assignment data about the units inside.
Check of consistency between laying of cables and conduit characteristics; management of multiple laid for a single unit.
Automatic detection of length, conditions of proximity and laying of each conduit.
Setup of electrical distribution and assignment of power loads and their electrical characteristics.
Calculation of the electric barycentre of loads according to standards.
Labelling of units, representation of the installation details, table of cables.
Identification of the laying method required, and summary table with the appropriate standard references.
Bi-directional connection with Ampère (optional module, see Ampère Professional) for the electrical grid calculation.
Automatic generation of single-wire, multi-wire or radial diagram as a result of the design in Ampère.
Export data to Sigma software for estimation (optional module, Italian only).

Index

Setup of networks of structured cabling, alarm, EVAC, fire protection and video surveillance.
Marking cables and terminations in accordance with IEC 11801.
Definition of generic auxiliary networks, TV / SAT and machine cabling.
Automatic recognition of conduits paths and filling check on dedicated compartment.

Index

Management of the block diagram of the system.
Automatic generation of the panels block diagram as a result of the dimensioning done in Ampère.
Automatic layout generation of photovoltaic system as a result of a Solergo project.

Index

Automatic processing of design variation, for comparison between states of the project.
Extraction of data for the calculation of the variation, with elements added, removed or changed.

Index

Viewer of multisheet diagrams with possibility to save as PDF.
This is a free tool to browse multisheet diagrams without requiring the software that created them.

Features and download

Index